How to Program a 1991 Ford Econoline Keyless Entry Remote Key Fob

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1991 Ford Econoline

Step-by-Step Programming Instructions:

1. Turn the ignition to the RUN or ACC position.
2. Locate the programming connector plug and insert a jumper wire into it to initiate the programming procedure. All doors will lock then unlock to confirm entry into programming mode. (The plug is black and has two wires: one white with a yellow stripe and one gray with a yellow stripe. The plug is part of a large harness that runs under the column at the bottom edge of the dashboard.)
3. Press any button on the first keyless remote. The door locks will cycle to confirm successful programming.
4. If programming a second keyless remote, press any button on it and the door locks will cycle again to confirm programming.
5. Turn the ignition to the OFF position. The door locks will cycle again to indicate the end of the programming mode.
6. Remove the jumper wire from the programming connector.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1991 Ford Econoline