404 Not Found


nginx
404 Not Found

404 Not Found


nginx
How to Program a 2005 Toyota Prius Ignition Smart Key Fob - KeyLessCanada : Instructions

Powered By
KeylessCanada.com

PROGRAMMING INSTRUCTIONS:

How to Program a 2005 Toyota Prius Ignition Smart Key Fob

0
29

Compare
SKU: Remote Toyota Prius 2005 Categories: , , , Tags: , , ,

Description

Click Hereto purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2005 Toyota Prius

Step-by-Step Programming Instructions:

If your remote features a Silver Toyota Logo on the back and lacks a manual on-board procedure, special equipment is needed to program it. Visit LocateALocksmith.com to find a locksmith in your area.

For remotes with a Black Toyota Logo on the back, follow these steps:
1. Open the driver’s door and remove the remote transmitter from the ignition switch slot.
2. Within 5 seconds, insert and remove the remote transmitter from the ignition switch slot twice.
3. Within 40 seconds, close and open the driver’s door twice.
4. Insert and remove the remote transmitter from the ignition switch slot again.
5. Close and open the driver’s door twice.
6. Insert the remote transmitter into the ignition switch slot and close the driver’s door within 40 seconds.
7. Note: Do not depress the brake pedal during the following operation.
8. Press the POWER button to switch the ignition ON (amber LED illuminated) and OFF once to program a remote transmitter code while retaining the original code, or twice to program a remote transmitter code while erasing the original codes.
9. Press the button three times to check how many remote transmitters are currently registered, or five times to erase all registered codes.
10. Remove the remote transmitter from the ignition switch slot within 5 seconds.
11. Within 5 seconds, the system should lock and unlock the vehicle once, twice, or five times depending on the selected mode. One to four times, slowly, to indicate the number of remote transmitters registered.
12. Within 40 seconds, press and hold the LOCK and UNLOCK buttons simultaneously for 1.5 seconds.
13. Within 3 seconds, press the LOCK button. The system should now lock and unlock the vehicle once to confirm registration, or twice to indicate registration has failed.
14. Within 40 seconds, repeat the button procedure to program the remaining remote transmitter.
15. Note: To exit programming mode, open the driver’s door.
16. Note: A maximum of 4 remote transmitters can be programmed. Remote transmitters can also be programmed using diagnostic equipment.

Click Hereto purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2005 Toyota Prius

Leave a reply

X
X