Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2006 Toyota Land Cruiser

Step-by-Step Programming Instructions:

If you have a remote head key, this process will only program the remote part of the key. You will need to have a locksmith program the key portion.

1. Begin with the key out of the ignition, the driver’s door open, all other doors closed, and the driver’s door unlocked.
2. Complete these steps within 5 seconds:
A. Insert the key into the ignition (do not turn) and then pull it out.
B. Insert the key into the ignition (do not turn) and then pull it out.
3. Complete these steps within 40 seconds:
A. Close and then open the driver’s door.
B. Close and then open the driver’s door.
C. Insert the key into the ignition (do not turn) and then pull it out.
4. Complete these steps within 40 seconds:
A. Close and then open the driver’s door.
B. Close and then open the driver’s door.
C. Insert the key into the ignition and leave it in the ignition.
D. Close the driver’s door.
E. Turn the ignition to ON (do not start) and then back to OFF.
F. Remove the key from the ignition.
5. Within 3 seconds, the power door locks should automatically lock and then unlock, indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point.
6. Complete these steps within 40 seconds:
A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds.
B. Immediately after releasing the lock and unlock buttons, press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once, indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted.
C. Repeat steps A and B in step 6 for each new remote.
7. Open the driver’s door.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2006 Toyota Land Cruiser