Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2009 Scion xB

Step-by-Step Programming Instructions:

These instructions are for programming the remote portion of your Remote Head Key. The key part of your key will need to be cut and programmed by a Locksmith. There are four different modes you can use to program remote door lock functions:

1. Confirmation Mode:
To check the number of remotes programmed into the car:
– Start with the key out of the car, driver’s door open and unlocked.
– Insert the key in the ignition and pull out.
– Within 5 seconds, insert the key in the ignition and pull out again.
– Within 40 seconds, close and open the driver’s door twice, then insert and remove the key from the ignition again.
– Within another 40 seconds, close and open the driver’s door twice, then insert the key in the ignition and close the driver’s door.
– Turn the ignition switch from LOCK to ON to OFF three times, leaving the key on for one second and off for one second each time.
– Remove the key from the ignition lock.
– The doors will lock and unlock themselves at about 2-second intervals. The number of times that the doors lock is the number of remotes programmed into the car. If the car locks/unlocks 5 times, there are no codes registered.

2. Add Mode:
To add a remote without disturbing existing remotes:
– Start with the key out of the car, driver’s door open and unlocked.
– Insert the key in the ignition and pull out.
– Within 5 seconds, insert the key in the ignition and pull out again.
– Within 40 seconds, close and open the driver’s door twice, then insert and remove the key from the ignition again.
– Within another 40 seconds, close and open the driver’s door twice, then insert the key in the ignition and close the driver’s door.
– Turn the ignition switch from LOCK to ON to OFF, leaving the key on for one second and off for one second.
– Remove the key from the ignition lock.
– The doors will lock and unlock themselves once.
– Within 40 seconds, press the lock and unlock buttons on the transmitter at the same time and release.
– Within 3 seconds, press either switch and release.
– The doors will lock and unlock themselves once if the registration was successful. They will lock and unlock twice if the registration failed.
– If you have other remotes to program, go back to step 7 within 40 seconds.
– Insert the key in the ignition or open a door to complete registration.

3. Rewrite Mode:
To erase all remotes and add new ones:
– Start with the key out of the car, driver’s door open and unlocked.
– Insert the key in the ignition and pull out.
– Within 5 seconds, insert the key in the ignition and pull out again.
– Within 40 seconds, close and open the driver’s door twice, then insert and remove the key from the ignition again.
– Within another 40 seconds, close and open the driver’s door twice, then insert the key in the ignition and close the driver’s door.
– Turn the ignition switch from LOCK to ON to OFF twice, leaving the key on for one second and off for one second each time.
– Remove the key from the ignition lock.
– The doors will lock and unlock themselves twice, indicating that you are in rewrite mode.
– Within 40 seconds, press the lock and unlock buttons on the transmitter at the same time and release.
– Within 3 seconds, press either switch and release.
– The doors will lock and unlock themselves once if the registration was successful. They will lock and unlock twice if the registration failed.
– If you have other remotes to program, go back to step 7 within 40 seconds.
– Insert the key in the ignition or open a door to complete registration.

4. Prohibition Mode:
To erase all codes and disable wireless door lock function:
– Start with the key out of the car, driver’s door open and unlocked.
– Insert the key in the ignition and pull out.
– Within 5 seconds, insert the key in the ignition and pull out again.
– Within 40 seconds, close and open the driver’s door twice, then insert and remove the key from the ignition again.
– Within another 40 seconds, close and open the driver’s door twice, then insert the key in the ignition and close the driver’s door.
– Turn the ignition switch from LOCK to ON to OFF five times, leaving the key on for one second and off for one second each time.
– Remove the key from the ignition lock.
– The doors will lock and unlock themselves 5 times at about 1-second intervals.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2009 Scion xB