How to Program a 2013 Scion tC Ignition Smart Key Fob

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2013 Scion tC

Step-by-Step Programming Instructions:

1. Start with the key removed from the ignition.
2. Open and unlock the driver’s side door. Close all other doors, including the trunk.
3. Within 5 seconds, insert the key into the ignition and then pull it out twice.
4. Close, then open the driver’s side door twice.
5. Insert the key into the ignition again and then remove it.
6. Close, then open the driver’s side door twice.
7. Insert the key into the ignition and leave it there.
8. Close the driver’s side door.
9. Switch the ignition to the ON position, then OFF.
10. Remove the key from the ignition.
11. The door locks will cycle to confirm that the vehicle has entered programming mode successfully.
12. Press and hold the lock and unlock buttons on the first remote being programmed for 1.5 seconds. As soon as you release, press the lock button and hold it for 2 seconds.
13. The door locks will cycle to confirm successful programming of the remote. If you have additional remotes to program, repeat step 12. If not, proceed to step 14.
14. Open the driver’s side door. Programming is now complete.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2013 Scion tC