How to Program a 2007 Scion tC Keyless Entry Remote Key Fob

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2007 Scion tC

Step-by-Step Programming Instructions:

1. Open the driver’s door and remove the key from the ignition switch.
2. Within five seconds, insert and remove the key from the ignition switch twice.
3. Within forty seconds, close and open the driver’s door twice.
4. Insert and remove the key from the ignition switch.
5. Within forty seconds, close and open the driver’s door twice.
6. Insert the key into the ignition switch and close the driver’s door.
7. Turn the ignition ON and OFF once to program a remote while retaining the original codes. Turn the ignition ON and OFF twice to program a remote while erasing the original code. Turn the ignition ON and OFF three times to check how many remotes are currently registered or five times to erase all registered remotes.
8. Remove the key from the ignition switch.
9. The system should now lock and unlock the vehicle once, twice, or five times depending on which mode has been selected. The locks should engage once to four times slowly to indicate how many remotes are programmed.
10. Within forty seconds, press and release the LOCK and UNLOCK buttons simultaneously.
11. Within three seconds, press the remote LOCK or UNLOCK button.
12. The system should now lock and unlock the vehicle. Once to confirm registration, twice to indicate programming has failed.
13. Within forty seconds, repeat step 10 to program additional remotes. Up to four remotes can be programmed.
14. To exit programming mode, open the driver’s door.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2007 Scion tC