Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1999 Pontiac Montana

Step-by-Step Programming Instructions:

1. Begin by removing the key from the ignition.
2. Locate the “BCMPRGRM” fuse in the fuse panel, which can be accessed by opening the front passenger door. Use the legend on the fuse panel to find the correct fuse.
3. Ensure all doors are closed.
4. Close the liftgate if it’s open.
5. Insert the keys into the ignition and turn the ignition lock cylinder to ACC (one click towards you, in the opposite direction from starting the engine).
6. Turn the ignition lock cylinder to OFF, and then back to ACC within 1 second.
7. Open and close any vehicle door. A chime will indicate that the system has entered programming mode.
8. Simultaneously press and hold the transmitter LOCK and UNLOCK buttons for 14 seconds. Note: After 7 seconds, a chime may confirm successful synchronization. Wait approximately 14 seconds for a second chime, which confirms successful programming. Your new remote has been accepted, and all existing remote codes have been erased.
9. Repeat the previous step for each additional transmitter to be programmed, including any existing transmitters.
10. Remove the ignition key from the ignition lock cylinder.
11. Reinstall the “BCMPRGRM” fuse back into the fuse panel.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1999 Pontiac Montana