Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2000 Oldsmobile Cutlass

Step-by-Step Programming Instructions:

Prior to entering programming mode, ensure you have all the transmitters you intend to use with the vehicle. Once programmed, all previous codes will be erased from memory. Other transmitters will not function until reprogrammed.

1. Close all vehicle doors.
2. Remove the key from the ignition. Note: To successfully enter keyless entry programming/diagnostic mode, complete steps 4-9 within 25 seconds of pressing the door unlock switch.
3. Press and hold the door unlock switch.
4. Hold down the power UNLOCK button on the driver’s door panel and continue holding until instructed to release.
5. Insert keys into the ignition.
6. Perform steps 7 through 10 fairly rapidly.
7. Turn the ignition switch to the ON position (as far as possible without starting the engine).
8. Turn the ignition switch to the OFF position.
9. Turn the ignition switch to the ON position.
10. Turn the ignition switch to the OFF position.
11. Release the power unlock button on the door panel. The vehicle will chime three times to indicate it’s in programming mode. It’s important to program ALL transmitters at this time. When a new transmitter is programmed, it will deactivate the old transmitters.
12. Hold down the LOCK and UNLOCK buttons on the transmitter for approximately 4 seconds or until the vehicle chimes twice to indicate successful programming.
13. Repeat the previous step for each additional transmitter (including any existing transmitters).
14. Turn the ignition switch to the ON position to exit the transmitter programming mode.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2000 Oldsmobile Cutlass