Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2006 Mitsubishi Raider

Step-by-Step Programming Instructions:

1. Ensure you have at least one working original remote transmitter. If not, consult a locksmith for programming assistance. Gather all remote transmitters for the vehicle; any unused ones will become inoperative if not reprogrammed.
2. Sit in the vehicle with all doors closed and the driver’s seatbelt on. Ensure no one else is in the vehicle.
3. Insert the key into the ignition and turn it to the ON position (without cranking the engine).
4. Using a programmed key/remote, follow these steps:
– Press and hold the UNLOCK button. After holding for at least 4 seconds, continue holding the UNLOCK button and also press the PANIC button within 6 seconds. An acoustic signal should indicate programming mode activation. Release both buttons.
5. Within 60 seconds, perform the following for each remaining key/remote:
– Press both the LOCK and UNLOCK buttons simultaneously for 2 seconds, then release. Ensure an acoustic signal is emitted.
– Within 4 seconds, press and release the UNLOCK button. Ensure an acoustic signal is emitted.
6. Repeat step 5 for each remaining key/remote, including working ones.
7. Switch the ignition to the OFF position or wait 60 seconds to exit programming mode.
8. Programming is now complete. Test all remotes to ensure proper programming.

For programming a transponder-equipped Raider key:
1. Ensure you have two working programmed keys.
2. Insert the first programmed key into the ignition and turn it to the ON position. After approximately 3 seconds, turn the ignition to OFF and remove the key.
3. Within 15 seconds, insert the second programmed key into the ignition and turn it to ON. Wait around 10 seconds; you’ll see the immobilizer warning lamp illuminate on the dash and hear an audible tone. Turn the ignition OFF and remove the key.
4. Within 50 seconds, insert the new unprogrammed key into the ignition and turn it to ON. After approximately 10 seconds, you should hear an audible tone, and the immobilizer lamp will remain illuminated for 3 seconds. Once this occurs, programming is completed.
5. Repeat these steps for each additional key, starting from step 1.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2006 Mitsubishi Raider