How to Program a 2010 Mercury Milan Ignition Smart Key Fob

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2010 Mercury Milan

Step-by-Step Programming Instructions:

1. Ensure you have two programmed keys and the new unprogrammed key easily accessible. If you lack two programmed keys, a locksmith will be needed to cut and program a second key. If you possess one working key, you can purchase a programmer and key.
2. Insert the first previously programmed key into the ignition.
3. Switch the ignition from off to on. Keep it on for at least three seconds, but no more than ten seconds.
4. Turn the ignition off and remove the first programmed key.
5. After three seconds but within ten seconds of turning the ignition off, insert the second previously programmed key.
6. Switch the ignition from off to on. Keep it on for at least three seconds, but no more than ten seconds.
7. Turn the ignition off and remove the second previously programmed key.
8. After three seconds but within ten seconds of turning the ignition off and removing the previously programmed key, insert the new unprogrammed key.
9. Switch the ignition from off to on. Keep it on for at least six seconds.
10. Remove the newly programmed key from the ignition. If successfully programmed, it will start the engine and operate the remote entry system (if the new key is an integrated keyhead transmitter). If unsuccessful, wait ten seconds and repeat Steps 1 through 8.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2010 Mercury Milan