How to Program a 2018 Lincoln MKT Ignition Smart Key Fob

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2018 Lincoln MKT

Step-by-Step Programming Instructions:

Note: You can program up to four keys for your vehicle. You need two previously programmed intelligent access keys inside your vehicle and the new unprogrammed intelligent access keys readily accessible. If you don’t have two previously programmed keys, contact a locksmith to program the spare key. Ensure the ignition is switched off before starting. Close all doors before beginning and keep them closed throughout the procedure. Complete all steps within 30 seconds of starting the sequence. Pause for at least one minute if you perform any steps out of sequence. Read and understand the entire procedure before starting.

1. Open the floor console storage compartment lid.
2. Insert the passive key into the backup slot.
3. Press the push-button ignition switch.
4. Wait five seconds, then press the push-button ignition switch again.
5. Remove the intelligent access key.
6. Within 10 seconds, place a second programmed intelligent access key in the backup slot and press the push-button ignition switch.
7. Wait five seconds, then press the push-button ignition switch again.
8. Remove the intelligent access key.
9. Wait five seconds, then place the unprogrammed intelligent access key in the backup slot and press the push-button ignition switch.

Programming is now complete. Verify that the remote control functions operate and your vehicle starts with the new intelligent access key.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2018 Lincoln MKT