Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2011 Lincoln MKT

Step-by-Step Programming Instructions:

To program spare Intelligent Access Keys for your vehicle, you need two previously programmed Intelligent Access Keys inside the vehicle and the new unprogrammed keys readily accessible. If you lack two previously programmed keys, a locksmith must program the spare key(s) for you.

Note: Your vehicle can have a maximum of four programmed Intelligent Access Keys. If you already have four access keys programmed, a locksmith must erase some programmed keys.

Before starting this procedure:

– Ensure the vehicle is off.
– Ensure all doors are closed and remain closed throughout the procedure.
– Perform the steps exactly as described below, completing each step within 30 seconds of starting the sequence.
– If any steps are performed out of sequence, stop and wait for at least one minute before starting again.
– Please read and understand the entire procedure before starting.

1. Place the new unprogrammed Intelligent Access Key in the pocket inside the center console utility compartment.

2. Press the driver or passenger power door unlock control three times.

3. Press and release the brake pedal once.

4. Press the driver or passenger power door lock control three times.

5. Press and release the brake pedal once. The indicator on the Start/Stop button should begin to rapidly flash, indicating that programming mode has been entered and two programmed Intelligent Access Keys have been detected in the vehicle.

6. Within one minute, press the start/stop button. If four Intelligent Access Keys have already been programmed to your vehicle, the message “MAX#OFFOBSLEARNED” will be displayed on the message center.

7. Remove from glove box pocket and press the unlock or lock control on the newly programmed Intelligent Access Keys to exit programming mode.

8. Verify that the remote entry functions operate (lock, unlock) and that the vehicle starts with the new Intelligent Access Key. If the Intelligent Access Key has been successfully programmed, it can be used to activate the Intelligent Access with Push Button Start feature and to start your vehicle.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2011 Lincoln MKT