Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2017 Lincoln Continental

Step-by-Step Programming Instructions:

1. Ensure you have two previously programmed intelligent access keys inside your vehicle, along with the new unprogrammed key accessible.
2. If you only have one key or no working keys, contact a local locksmith.
3. Make sure the ignition is switched off before starting the procedure.
4. Ensure all doors are closed before starting and remain closed throughout the procedure.
5. Complete all steps within 30 seconds of starting the sequence.
6. If any steps are performed out of sequence, stop and wait for at least one minute before starting again.
7. Read and understand the entire procedure before beginning.

Now, follow these steps:

1. Remove the key blade from the transmitter.
2. Open the floor console storage compartment lid.
3. Insert the first programmed key into the backup slot.
4. Press the push-button ignition switch.
5. Wait five seconds, then press the push-button ignition switch again.
6. Remove the intelligent access key.
7. Within 10 seconds, place the second programmed intelligent access key in the backup slot and press the push-button ignition switch.
8. Wait five seconds, then press the push-button ignition switch again.
9. Remove the intelligent access key.
10. Wait five seconds, then place the unprogrammed intelligent access key in the backup slot and press the push-button ignition switch.

Your programming is now complete. Check that the remote control functions operate and your vehicle starts with the new intelligent access key. If programming was unsuccessful, wait 10 seconds and repeat steps 1 through 7.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2017 Lincoln Continental