Description
to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2018 Jeep Wrangler
Step-by-Step Programming Instructions:
If you have a Smart Key System, please consult a locksmith for programming assistance. Note: You’ll need two programmed keys to add a new key to the system.
1. Insert the first valid key into the ignition switch. Turn the ignition switch to the ON/RUN position for at least three seconds but no longer than 15 seconds. Then, turn the ignition switch to the LOCK position and remove the first key.
2. Insert the second valid key into the ignition switch. Turn the ignition switch to the ON/RUN position within 15 seconds. After 10 seconds, a chime will sound, and the Vehicle Security Light will start flashing. Turn the ignition switch to the LOCK position and remove the second key.
3. Insert the new key into the ignition switch. Turn the ignition switch to the ON/RUN position within 60 seconds. After 10 seconds, a single chime will sound, and the Vehicle Security Light will stop flashing. To indicate that programming is complete, the Vehicle Security Light will turn on again for a few seconds and then turn off. Your new key is now programmed. The Remote Keyless Entry transmitter will also be programmed during this procedure. Repeat this procedure to program up to eight keys.
to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2018 Jeep Wrangler