Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2000 Isuzu VehiCROSS

Step-by-Step Programming Instructions:

1. Adjust the driver’s seat forward to access the keyless entry receiver beneath it.
2. Insert the key into the ignition and turn it to the ON position. (ON is just before starting the vehicle without cranking the engine).
3. Locate the green button on the side of the keyless entry receiver, inside a small hole accessible with a pointed object like a pen or pencil.
4. Use the pointed object to press and hold the green button until the exterior lights or the LED on the driver’s side dash illuminate, then release.
5. Within 5 seconds of completing step 4, press and release the top button on the remote. The LED should turn OFF, the siren should chirp once, and the front marker lights will flash if the remote is successfully programmed.
6. Repeat steps 4 and 5 for any additional remotes to be programmed.
7. Turn the ignition to OFF, test all remotes, and replace the panel you had removed.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2000 Isuzu VehiCROSS