Description
to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2000 Honda Odyssey
Step-by-Step Programming Instructions:
Please note: This system allows up to three remotes and stores them in a stacking-type memory. If a fourth remote is programmed, the first remote will be erased.
1. Turn the ignition switch to ON (II).
2. Within 4 seconds, press the LOCK or UNLOCK button on one of the remotes. Ensure the remote is aimed at the receiver near the glovebox.
3. Within 4 seconds, turn the ignition switch to LOCK (0).
4. Repeat steps 1, 2, and 3 two more times using the same keyless remote used in step 2.
5. Within 4 seconds, turn the ignition switch to ON (II).
6. Within 4 seconds, press the LOCK or UNLOCK button on the same remote. Ensure the power door locks cycle to confirm you are in programming mode. Press the LOCK or UNLOCK button again.
7. Press the LOCK or UNLOCK button on each remote you want to program. Ensure door locks cycle after you push each remote button to confirm the system has accepted the remote.
8. Turn the ignition switch to LOCK (0) to exit programming mode.
9. Test remote(s).
For the 2000 LX Model with Dealer Installed Keyless Entry System:
1. Turn the ignition switch to ON (II).
2. Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
3. Turn the ignition switch to LOCK (0).
4. Repeat steps 1, 2, and 3 two more times using the same keyless remote used in step 2.
5. Turn the ignition switch to ON (II).
6. Press the LOCK or UNLOCK button on the same remote. Ensure the power door locks cycle to confirm you are in programming mode.
7. Press the LOCK or UNLOCK button on each remote you want to program. Ensure door locks cycle after you push each remote button to confirm the system has accepted the remote.
8. Turn the ignition switch to LOCK (0) to exit programming mode.
9. Test remote(s).
to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2000 Honda Odyssey