Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1997 Honda Odyssey

Step-by-Step Programming Instructions:

1. Open the driver’s door.
2. Push and hold the driver’s power door lock switch in the unlock position. Keep holding the switch throughout this process.
3. Insert the key into the ignition, then remove it. Repeat this action four more times within 10 seconds. Make sure to complete steps 3 and 4 within 10 seconds, or the system will exit the programming mode.
4. Insert the key into the ignition. After inserting the key, ensure the power door locks cycle to confirm that the system is in the programming mode.
5. Press the LOCK and UNLOCK buttons on the remote. All power door locks (except the driver’s door) should cycle to confirm that the system has accepted the remote.
6. To program a second remote, press the LOCK and UNLOCK buttons within 10 seconds of programming the first remote. Note that the system will only accept two remotes.
7. Release the master power door lock switch to exit the programming mode.
8. Test the remotes.

For 1997 EX and LX models with a dealer-installed keyless entry system, note the following:

– Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work. You must reprogram all keyless remotes once you are in the programming mode.
– Complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.

Instructions:

1. Turn the ignition switch to ON (II).
2. Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
3. Turn the ignition switch to LOCK (0).
4. Repeat steps 1, 2, and 3 two more times using the same keyless remote used in step 2.
5. Turn the ignition switch to ON (II).
6. Press the LOCK or UNLOCK button on the same remote. Ensure the power door locks cycle to confirm you are in programming mode.
7. Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm the system has accepted the remote.
8. Turn the ignition switch to LOCK (0) to exit programming mode.
9. Test the remote(s).

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1997 Honda Odyssey