Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2015 GMC Yukon XL

Step-by-Step Programming Instructions:

For Yukon XL vehicles with separate key and remote:

1. Find an automotive locksmith in your area using LocateALocksmith.com.
2. If your vehicle is still drivable, consider driving to the locksmith to potentially save money.
3. The locksmith will use specialized computer equipment to program the smart key remote fobs.

For Yukon XL vehicles with one programmed Smart Key:

1. Remove the key from the programmed remote.
2. Place the programmed remote in the cup holder or passenger seat.
3. Insert the vehicle key into the key lock cylinder on the driver door handle. Turn the key counterclockwise to the unlock position five times within 10 seconds. The Driver Information Center (DIC) will display “READY FOR REMOTE #2, 3, 4, etc.”
4. Place the new remote in the remote pocket/insert located in the center console storage area.
5. Press the ENGINE START/STOP button. When the remote is learned, the DIC display will indicate readiness to program the next remote.
6. Remove the remote from the pocket and press unlock or lock. To program additional remotes, repeat steps 4–6. When all additional remotes are programmed, press and hold the ENGINE START/STOP button for approximately 12 seconds to exit programming mode.
7. Return the key to the remote.

For Programming without a programmed Smart Key:

1. Remove the vehicle key from the remote.
2. Insert the vehicle key into the key lock cylinder on the driver door handle. Turn the key counterclockwise to the unlock position five times within 10 seconds. The DIC displays “REMOTE LEARN PENDING, PLEASE WAIT.”
3. Wait for 10 minutes until the DIC displays “PRESS ENGINE START BUTTON TO LEARN,” then press the ENGINE START/STOP button. The DIC will again show “REMOTE LEARN PENDING, PLEASE WAIT.”
4. Repeat step 3 two additional times. After the third time, all previously known remotes will no longer work with the vehicle. Remaining remotes can be relearned during the next steps. The DIC display should now show “READY FOR REMOTE #1.”
5. Place the new remote in the remote pocket/insert located in the center console storage area.
6. Press the ENGINE START/STOP button. When the remote is learned, the DIC display will indicate readiness to program the next remote.
7. Remove the remote from the pocket/insert and press unlock or lock on the remote. To program additional remotes, repeat steps 5–7. When all additional remotes are programmed, press and hold the ENGINE START/STOP button for approximately 12 seconds to exit programming mode.
8. Return the key to the remote.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2015 GMC Yukon XL