Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2015 GMC Yukon

Step-by-Step Programming Instructions:

If your Yukon has one programmed Smart Key, follow these instructions to program a new fob to the vehicle when there is one programmed remote:

1. Remove the key from the programmed remote.
2. Place the programmed remote in the cup holder or passenger seat.
3. Insert the vehicle key into the key lock cylinder on the driver door handle. Turn the key counterclockwise to the unlock position five times within 10 seconds. The Driver Information Center (DIC) will display “READY FOR REMOTE #2, 3, 4, ETC.”
4. Place the new remote in the remote pocket/insert located in front of the storage area next to the center console storage area between the driver and front passenger seats.
5. Press the ENGINE START/STOP button. When the remote is learned, the DIC display will show that it is ready to program the next remote.
6. Remove the remote from the remote pocket and press unlock or lock on the remote. To program additional remotes, repeat Steps 4–6. When all additional remotes are programmed, press and hold the ENGINE START/STOP button for approximately 12 seconds to exit programming mode.
7. Return the key back into the remote.

For Programming without a programmed Smart Key:

If there are no currently programmed remotes available, follow this procedure to program up to eight remotes. This feature is not available in Canada. This procedure will take approximately 30 minutes to complete. The vehicle must be off and all remotes to be programmed must be with you.

1. Remove the vehicle key from the remote.
2. Insert the vehicle key into the key lock cylinder on the driver door handle. Turn the key counterclockwise to the unlock position five times within 10 seconds. The Driver Information Center (DIC) will display “REMOTE LEARN PENDING, PLEASE WAIT.”
3. Wait for 10 minutes until the DIC displays “PRESS ENGINE START BUTTON TO LEARN,” then press the ENGINE START/STOP button. The DIC display will again show “REMOTE LEARN PENDING, PLEASE WAIT.”
4. Repeat Step 3 two additional times. After the third time, all previously known remotes will no longer work with the vehicle. Remaining remotes can be relearned during the next steps. The DIC display should now show “READY FOR REMOTE #1.”
5. Place the new remote in the remote pocket/insert.
6. Press the ENGINE START/STOP button. When the remote is learned, the DIC display will show that it is ready to program the next remote.
7. Remove the remote from the remote pocket/insert and press unlock or lock on the remote. To program additional remotes, repeat Steps 5–7. When all additional remotes are programmed, press and hold the ENGINE START/STOP button for approximately 12 seconds to exit programming mode.
8. Return the key back into the remote.

If your Yukon has a separate key and remote:

This vehicle is not onboard programmable and requires a qualified professional to program smart key remote fobs.

1. Locate an automotive locksmith in your area using LocateALocksmith.com.
2. If your vehicle is still mobile, it may save you money by driving to the locksmith instead of having them come to you.
3. The locksmith will then hook up specialized computer equipment to your vehicle in order to program the smart key remote fob.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2015 GMC Yukon