Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1998 GMC Jimmy

Step-by-Step Programming Instructions:

1. Ensure all vehicle doors are closed.
2. Insert the key into the ignition.
3. Press and hold the power UNLOCK button on the driver’s door panel. Continue holding until instructed to release in step 9.
4. Perform steps 5 through 8 in fairly rapid succession.
5. Turn the ignition switch to the ON position (as far as you can go without starting the engine).
6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.
10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds.
11. Repeat step 10 for each additional transmitter (including any existing transmitters).
12. Turn the ignition switch to the ON position to exit the transmitter programming mode.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1998 GMC Jimmy