Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2009 Ford Taurus

Step-by-Step Programming Instructions:

1. Start by ensuring all doors are closed. Then, open the driver’s door and press the UNLOCK button on the driver’s door panel while the door is open. Insert the key into the ignition.

2. Turn the ignition from OFF to RUN eight times within 10 seconds, with the eighth time ending in the RUN position. The door locks will cycle to confirm you’ve entered programming mode.

3. Within 20 seconds, press any button on the first keyless remote. The door locks will cycle again to confirm programming.

4. Within another 20 seconds, press any button on the second keyless remote. Once more, the door locks will cycle to confirm programming.

5. Turn the ignition to OFF. The locks will cycle again to indicate the end of programming mode.

To program the key portion of the key, you’ll need two working keys. If you have only one working key, you’ll need a locksmith to program a second key or purchase a programmer.

For programming the key portion:

1. Insert an existing working key into the ignition cylinder.

2. Turn the ignition cylinder to ON (RUN) and then back to OFF.

3. Remove the existing working key and, within five seconds, insert a second working key and turn it to ON (RUN), then back to OFF.

4. Remove the second working key and insert the new key before ten seconds have elapsed. Turn it to ON (RUN) and leave it for one second, then turn it back to OFF.

5. The security light will illuminate for three seconds, indicating that the new key has been successfully programmed.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2009 Ford Taurus