Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2017 Ford F450 Super Duty

Step-by-Step Programming Instructions:

If your Ford F450, F350, F450, F550 is equipped with the flip key or remote head key/combo system, you can use these instructions to program keys. Remember, a maximum of eight keys can be programmed to your vehicle, and only SecuriLock keys can be used. Before you start, ensure you have two previously programmed keys (keys that already operate your vehicle’s engine) and the new unprogrammed key(s) readily accessible. Here’s the procedure:

1. Insert the first previously programmed key into the ignition and turn it from the OFF position to the ON position (keep it in the ON position for at least one second, but no more than ten seconds).
2. Turn the ignition from the ON position back to the OFF position to remove the first programmed key from the ignition.
3. After three seconds but within ten seconds of removing the first key, insert the second previously programmed key into the ignition and turn it from the OFF position to the ON position (keep it in the ON position for at least one second, but no more than ten seconds).
4. Turn the ignition from the ON position back to the OFF position to remove the second programmed key from the ignition.
5. After three seconds but within ten seconds of removing the second key, insert the new unprogrammed key (new key/valet key) into the ignition and turn it from the OFF position to the ON position (keep it in the ON position for at least one second, but no more than ten seconds). This step will program your new key to a programmed key.
6. To program additional new unprogrammed keys, repeat Steps 1 through 5. If successful, the new programmed key(s) will start the vehicle’s engine and operate the remote functions.

Now, if your Ford F450, F350, F450, F550 has the smart key system, follow these instructions:

Make sure you have two previously programmed intelligent access keys inside your vehicle and the new unprogrammed intelligent access keys readily accessible. Ensure your vehicle is off before starting the procedure and that all doors are closed throughout the process. Perform all steps within 30 seconds of starting the sequence. If you perform any steps out of sequence, stop and wait for at least one minute before starting again. Here are the steps:

1. Place the first programmed key in the backup slot in the center console, then press the push-button ignition switch. Insert the first previously programmed coded key into the ignition.
2. Wait five seconds, then press the push-button ignition switch again. Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than ten seconds.
3. Remove the intelligent access key. Switch the ignition off and remove the first coded key from the ignition.
4. Within ten seconds, place a second programmed intelligent access key in the backup slot. Press the push-button ignition switch. After three seconds but within ten seconds of switching the ignition off, insert the second previously coded key into the ignition.
5. Wait five seconds, then press the push-button ignition switch again. Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than ten seconds.
6. Remove the intelligent access key. Switch the ignition off and remove the second previously programmed coded key from the ignition.
7. Place the unprogrammed intelligent access key in the backup slot and press the push-button ignition switch. After three seconds but within ten seconds of switching the ignition off and removing the previously programmed coded key, insert the new unprogrammed key into the ignition. Programming is now complete. Verify the remote control functions operate and your vehicle starts with the new intelligent access key. If programming was not successful, wait ten seconds and repeat Steps 1 through 7.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2017 Ford F450 Super Duty