Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2005 Dodge Magnum

Step-by-Step Programming Instructions:

**Note: This procedure is applicable only to vehicles built in the USA. You must have two working programmed remotes/keys before you can add a third remote/key. If you only have one working remote/key and want to add a second key, this procedure will not work.**

1. Using the first programmed remote/key, turn the ignition to the ON position for 5 seconds (Do not crank the engine). Turn the remote/key off and remove it.

2. Within 5 seconds, insert the second working programmed remote/key. Turn the ignition to the ON position (Do not crank the engine). The security light will begin to flash, and a chime will be heard within 10 seconds. Turn the remote/key off and remove it. Note: Some vehicles may not chime; only the security light will flash.

3. Within 5 seconds, insert the third new cut remote/key and turn the ignition to the ON position (Do not crank the engine). The security light should start flashing, and within 10 seconds, you should hear a chime, and the security light should go out. Once the security light goes out, the new remote/key should be programmed. Turn the remote/key to the OFF position and remove it.

4. Test the key and remote.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2005 Dodge Magnum