Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2015 Chevrolet Tahoe

Step-by-Step Programming Instructions:

If your Tahoe has a separate key and remote, it cannot be programmed onboard and requires a qualified professional to program smart key remote fobs.

1. Find an automotive locksmith in your area using LocateALocksmith.com.
2. If your vehicle is still mobile, you may save money by driving to the locksmith instead of having them come to you.
3. The locksmith will then connect specialized computer equipment to your vehicle to program the smart key remote fob.

Programming with a Recognized Transmitter (Keyless Access Vehicles Only):

A new transmitter can be programmed to the vehicle when there is one recognized transmitter. To program, the vehicle must be off, and all transmitters, both currently recognized and new, must be with you.

1. Remove the key from the recognized transmitter.
2. Place the recognized transmitter(s) in the cup holder or passenger seat.
3. Insert the vehicle key into the key lock cylinder on the driver door handle. Then turn the key counterclockwise to the unlock position five times within 10 seconds. The Driver Information Center (DIC) displays “READY FOR REMOTE #2, 3, 4, etc.”
4. Place the new transmitter in the transmitter pocket/insert located in the center console storage area.
5. Press the ENGINE START/STOP button. When the transmitter is learned, the DIC display will indicate readiness to program the next transmitter.
6. Remove the transmitter from the transmitter pocket and press unlock or lock. To program additional transmitters, repeat Steps 4–6. When all additional transmitters are programmed, press and hold the ENGINE START/STOP button for approximately 12 seconds to exit programming mode.
7. Return the key back into the transmitter.

Programming without a Recognized Transmitter (Keyless Access Vehicles Only):

If there are no currently recognized transmitters available, follow this procedure to program up to eight transmitters. This feature is not available in Canada. This procedure will take approximately 30 minutes to complete. The vehicle must be off, and all transmitters to be programmed must be with you.

1. Remove the vehicle key from the transmitter.
2. Insert the vehicle key into the key lock cylinder on the driver door handle and turn the key counterclockwise to the unlock position five times within 10 seconds. The DIC displays “REMOTE LEARN PENDING, PLEASE WAIT.”
3. Wait for 10 minutes until the DIC displays “PRESS ENGINE START BUTTON TO LEARN,” then press the ENGINE START/STOP button. The DIC display will again show “REMOTE LEARN PENDING, PLEASE WAIT.”
4. Repeat Step 3 two additional times. After the third time, all previously known transmitters will no longer work with the vehicle. Remaining transmitters can be relearned during the next steps. The DIC display should now show “READY FOR REMOTE #1.”
5. Place the new transmitter in the transmitter pocket/insert located in the center console storage area.
6. Press the ENGINE START/STOP button. When the transmitter is learned, the DIC display will indicate readiness to program the next transmitter.
7. Remove the transmitter from the transmitter pocket/insert and press unlock or lock. To program additional transmitters, repeat Steps 5–7. When all additional transmitters are programmed, press and hold the ENGINE START/STOP button for approximately 12 seconds to exit programming mode.
8. Return the key back into the transmitter.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2015 Chevrolet Tahoe