Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2000 Chevrolet Tahoe

Step-by-Step Programming Instructions:

For Tahoe model year with remote FCC# ABO1502T1:

1. Locate the Data Link Port beneath the driver’s side dashboard. Identify pins 8 and 4.
2. Ensure metal contact pins are present in terminals 8 and 4. Connect terminal 8 to terminal 4 using a suitable jumper wire (keep the wire connected throughout the programming).
3. The vehicle will respond by locking and unlocking the doors, indicating entry into programming mode.
4. Press and hold both the LOCK and UNLOCK buttons simultaneously on the first transmitter to be programmed. After approximately 15 seconds, the vehicle will respond by locking and unlocking the doors. Release the buttons on the transmitter.
5. Within one minute, repeat the previous step for the remaining transmitters to be programmed.
6. Remove the jumper wire from the OBDII Port.

For remote FCC# KOBUT1BT1:

1. Ensure all vehicle doors are closed.
2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver’s door panel and continue holding until instructed to release in step 9.
4. Perform steps 5 through 8 fairly rapidly.
5. Turn the ignition switch to the ON position (without starting the engine).
6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will automatically lock and unlock the doors.
10. Simultaneously hold down the LOCK and UNLOCK buttons on the transmitter until the door locks and unlocks. This step may take up to 30 seconds.
11. Repeat step 10 now for each additional transmitter (including any existing transmitters).
12. Turn the ignition switch to the ON position to exit the transmitter programming mode.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2000 Chevrolet Tahoe