How to Program a 2010 Chevrolet Silverado Keyless Entry Remote Key Fob

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2010 Chevrolet Silverado

Step-by-Step Programming Instructions:

Step-by-Step Programming Instructions: Use this Procedure for Vehicles without Driver’s Information Center Buttons. To access this display, the vehicle must be in Park (P) with the key in the on position (as far as you can go without cranking the engine).

1. Press the trip odometer reset stem until “RELEARN REMOTE KEY” displays.
2. Press and hold the trip odometer reset stem for three seconds. The message “REMOTE KEY LEARNING ACTIVE” will display.
3. Press and hold the lock and unlock buttons on the first keyless remote simultaneously for approximately 15 seconds. A chime will sound, indicating that the remote is programmed.
4. To program additional remotes at this time, repeat step 3. This vehicle can have a maximum of eight remotes programmed.
5. To exit programming mode, turn the key off and remove it. Test the remotes.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2010 Chevrolet Silverado