Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2019 Cadillac XTS

Step-by-Step Programming Instructions:

When there are two recognized transmitters, a new one can be programmed to the vehicle. To begin programming, ensure the vehicle is off, and all transmitters, both old and new, are with you. Each vehicle can accommodate up to eight matched transmitters.

1. Remove the vehicle key from the recognized transmitter.
2. Place the recognized transmitters in the cupholder.
3. Remove the key lock cylinder cap on the driver door handle. Insert the vehicle key into the key lock cylinder on the driver door handle, then turn the key counterclockwise to the unlock position five times within 10 seconds. The DIC (Driver Information Center) will display “READY FOR REMOTE #2, 3, 4, etc.”
4. Put the new transmitter into the transmitter pocket in the center console storage area.
5. Press ENGINE START/STOP. When the transmitter is learned, the DIC display will indicate readiness to program the next transmitter.
6. Remove the transmitter from the pocket and press Unlock or Lock on it. To program more transmitters, repeat Steps 4–6. Once all additional transmitters are programmed, press and hold ENGINE START/STOP for approximately 12 seconds to exit programming mode.
7. Return the key back into the transmitter.
8. Replace the key lock cylinder cap.

Programming without Recognized Transmitters:

If two recognized transmitters are unavailable, follow this procedure to program up to eight transmitters. Note: This feature is not available in Canada. This process takes approximately 30 minutes to complete. Ensure the vehicle is off, and all transmitters to be programmed are with you.

1. Remove the key lock cylinder cap. Insert the vehicle key into the key lock cylinder on the driver door handle, then turn it counterclockwise to the unlock position five times within 10 seconds. The DIC displays “REMOTE LEARN PENDING, PLEASE WAIT.”
2. Wait for 10 minutes until the DIC displays “PRESS ENGINE START BUTTON TO LEARN,” then press ENGINE START/STOP. The DIC will again display “REMOTE LEARN PENDING, PLEASE WAIT.”
3. Repeat Step 2 two additional times. After the third time, all previously known transmitters will no longer work with the vehicle. Remaining transmitters can be relearned in the next steps. The DIC should now display “READY FOR REMOTE #1.”
4. Place the new transmitter in the transmitter pocket in the center console storage area.
5. Press ENGINE START/STOP. When the transmitter is learned, the DIC will indicate readiness to program the next transmitter.
6. Remove the transmitter from the pocket and press Unlock or Lock on it. To program additional transmitters, repeat Steps 4–6. Once all additional transmitters are programmed, press and hold ENGINE START/STOP for approximately 12 seconds to exit programming mode.
7. Return the key back into the transmitter.
8. Replace the key lock cylinder cap.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2019 Cadillac XTS