Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2011 Cadillac SRX

Step-by-Step Programming Instructions:

Procedure for Adding a New Remote:

1. Ensure the vehicle is turned off.
2. Place the already programmed remote(s) in the cupholder and have the new remote with you.
3. Insert the key into the key lock cylinder on the outside of the driver’s door.
4. Turn the key to the unlock position five times within ten seconds.
5. The Driver Information Center (DIC) will display “Ready to Learn Electronic key #2, 3, 4, etc.”
6. Place the new remote into the transmitter pocket with the buttons facing the front of the vehicle. (The transmitter pocket is inside the center console between the driver and front passenger seats. You may need to open the storage area and lift the storage tray to access the transmitter pocket.)
7. Press the ignition. When the remote is learned, the DIC display will indicate readiness to program the next remote.
8. Remove the remote from the transmitter pocket and press unlock on the remote.
9. To program additional remotes, repeat steps 6 through 8.
10. When all additional transmitters are programmed, press and hold the ignition for ten seconds to exit programming mode.

Procedure for Programming Without Working Remotes:

1. Ensure the vehicle is turned off.
2. Insert the key into the key lock cylinder on the outside of the driver’s door.
3. Turn the key to the unlock position five times within ten seconds.
4. The DIC will display “REMOTE LEARN PENDING, PLEASE WAIT.”
5. Wait for ten minutes until the DIC displays “PRESS ENGINE START BUTTON TO LEARN,” then press the ignition. The DIC will again show “REMOTE LEARN PENDING, PLEASE WAIT.”
6. Repeat step 5 two additional times. After the third time, all previously known remotes will no longer work with the vehicle, but remaining remotes can be relearned.
7. Place the new remote into the transmitter pocket with the buttons facing the front of the vehicle. (Follow the same instructions as in step 6 of the previous procedure.)
8. Press the ignition. When the remote is learned, the DIC display will indicate readiness to program the next remote.
9. Remove the remote from the transmitter pocket and press unlock on the remote.
10. To program additional remotes, repeat steps 7 through 9.
11. When all additional transmitters are programmed, press and hold the ignition for ten seconds to exit programming mode.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2011 Cadillac SRX