Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1996 Buick Park Avenue

Step-by-Step Programming Instructions:

1. Insert the key into the ignition and leave it in the OFF position.
2. Locate the Data Link Port under the dash on the driver’s side. Be sure to identify pins 8 and 4 (Note: the port is wider at the top). Your OBDII port won’t have numbers, so refer to the provided diagram for reference.
3. Ensure there are metal contact pins in terminals 8 and 4. Connect terminal 8 to terminal 4 using a suitable jumper wire (keep the jumper wire connected throughout the programming procedure). The vehicle will respond by locking and unlocking the doors to indicate that it’s entered programming mode.
4. Close the door.
5. Turn the ignition to the ON position (without cranking the engine). The doors will lock.
6. Press and hold both the LOCK and UNLOCK buttons together on the first transmitter to be programmed. After about 15 seconds, the vehicle will respond by locking and unlocking the doors. Release the buttons on the transmitter.
7. Within one minute, repeat the previous step for the remaining transmitters to be programmed.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1996 Buick Park Avenue