Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1995 Buick LeSabre

Step-by-Step Programming Instructions:

1. Insert the key into the ignition and leave it in the OFF position.
2. Locate the Data Link Port under the dash on the driver’s side. Ensure you identify pins 8 and 4. (Note: the port is wider at the top). Your OBDII port won’t have numbers, so use the provided diagram for reference.
3. Ensure there are metal contact pins in terminals 8 and 4. Connect terminal 8 to 4 with a suitable jumper wire (keep the jumper wire connected throughout the programming procedure). Make sure you identify terminals 8 and 4.
4. Close all doors.
5. Turn the ignition to the ON position (without cranking the engine). The doors will lock.
6. Press and hold both the LOCK and UNLOCK buttons together on the first transmitter to be programmed. After about 15 seconds, the vehicle will respond by locking and unlocking the doors. Release the buttons on the transmitter.
7. Within one minute, repeat the previous step for the remaining transmitters to be programmed.
8. Remove the jumper wire applied to the OBDII Port.
9. A maximum of two keyless remotes can be programmed.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1995 Buick LeSabre