Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2006 Mitsubishi Outlander

Step-by-Step Programming Instructions:

Important Note: To add a third key to the system, you must have two previously programmed working ignition keys. If you do not have two functioning keys, you will need to enlist the services of a locksmith to program a second key for you. Locate a locksmith in your area to assist you with this.

1. Begin by ensuring your new key is cut to match your previously programmed keys.

2. Insert the first previously programmed key into the ignition and turn it to the ON position (do not start the engine) for 5 seconds. Then, turn it back to the OFF position and remove it.

3. Insert the second previously programmed key into the ignition and turn the ignition to the ON position (do not start) until the immobilizer indicator light begins flashing (within 10 seconds). Then, turn it back to the OFF position and remove it. If an error occurs while the immobilizer light is flashing, it will go out; otherwise, it should continue flashing.

4. Within 30 seconds of the flashing indicator light, insert the new unprogrammed key into the ignition and turn it to the ON position (do not start). The immobilizer light should remain solid for about 3 seconds when programming is complete. Then, turn it back to the OFF position and remove the key. If an error occurs, the immobilizer light will flash 3 times, indicating you must start over from the beginning.

5. Your car should now start with the new key.

6. Repeat steps 1 through 5 for each additional new key you wish to program.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2006 Mitsubishi Outlander