Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2017 Ford Fusion

Step-by-Step Programming Instructions:

Programming a Spare Smart Key:

Note: Your vehicle allows a maximum of four keys to be programmed. You need two previously programmed keys and the new unprogrammed key readily accessible. If you lack two previously programmed keys, you’ll require a locksmith to cut and program a second key. Ensure the ignition is switched off before commencing this procedure. Also, ensure all doors are closed throughout the process. Perform all steps within 30 seconds of starting the sequence. Wait for at least one minute before restarting if any steps are performed out of sequence. Fully comprehend the entire procedure before starting.

1. Remove the key blade from the transmitter.
2. Remove the rubber covering from the cup holder. Orient the first smart key with the buttons facing upward and the unlock button facing the front of your vehicle, then place it into the backup slot.
3. Press the push button ignition switch.
4. After a five-second interval, press the push button ignition switch again.
5. Remove the intelligent access key.
6. Within 10 seconds, insert a second programmed smart key into the backup slot and press the push button ignition switch.
7. After another five-second pause, press the push button ignition switch again.
8. Remove the smart key.
9. Wait for five seconds, then insert the unprogrammed smart key into the backup slot and press the push button ignition switch.

Programming is now complete. Verify that the remote control functions operate, and your vehicle starts with the new smart key. If programming was unsuccessful, wait for 10 seconds and repeat steps 1 through 7.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2017 Ford Fusion