404 Not Found


nginx
404 Not Found

404 Not Found


nginx
How to Program a 2018 Ford Edge Ignition Smart Chip Key Transponder - KeyLessCanada : Instructions

Powered By
KeylessCanada.com

PROGRAMMING INSTRUCTIONS:

How to Program a 2018 Ford Edge Ignition Smart Chip Key Transponder

0
31

Compare
SKU: Ford Edge 2018 Categories: , , , Tags: , ,

Description

Click Hereto purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2018 Ford Edge

Step-by-Step Programming Instructions:

To start this process, make sure you have two previously programmed smart keys inside your vehicle, and keep the new unprogrammed smart key handy. Note that your vehicle can accept a maximum of four smart keys. If you want to replace an existing programmed smart key with a new one, or if you already have four smart keys programmed, you’ll need to contact a Locksmith to erase and reprogram them.

Before you begin, ensure the vehicle is turned off and all doors are closed securely. Maintain these conditions throughout the procedure. Follow the steps precisely, completing each within 30 seconds of starting. If you make a mistake in the sequence, pause for at least a minute before trying again. Familiarize yourself with the entire process before starting.

1. Open the floor console storage compartment lid. Insert the intelligent access key into the backup slot, ensuring the buttons face the rear of the vehicle and the key ring is positioned upward.
2. Repeat the process with the smart key, making sure it is inserted with the buttons facing the rear of the vehicle and the key ring positioned upward.
3. Press the push button ignition switch.
4. After a five-second interval, press the push button ignition switch again.
5. Remove the smart key.
6. Within 10 seconds, insert a second programmed smart key into the backup slot and press the push button ignition switch.
7. After another five-second interval, press the push button ignition switch again.
8. Remove the smart key.
9. Wait for five seconds, then insert the unprogrammed smart key into the backup slot and press the push button ignition switch.

Once you’ve completed these steps, the programming process is done. Check that the remote control functions work and that your vehicle starts with the new smart key. If the programming was unsuccessful, wait 10 seconds and repeat Steps 1 through 7.

Click Hereto purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2018 Ford Edge

Leave a reply

X
X