Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2007 Dodge Ram Pickup

Step-by-Step Programming Instructions:

Note: You must have two valid keys to add a new key to the system. If you lack two working keys, a locksmith must program a key for you. Follow these steps:

1. Insert the first valid key into the ignition switch. Turn the ignition switch to the ON/RUN position for at least three seconds, but no longer than 15 seconds. Then, turn the ignition switch to the LOCK position and remove the first key.

2. Insert the second valid key into the ignition switch. Turn the ignition switch to the ON/RUN position within 15 seconds. After 10 seconds, a chime will sound, and the Vehicle Security Light will begin to flash. Turn the ignition switch to the LOCK position and remove the second key.

3. Insert the new key into the ignition switch. Turn the ignition switch to the ON/RUN position within 60 seconds. After 10 seconds, a single chime will sound, and the Vehicle Security Light will stop flashing. Programming is complete when the Vehicle Security Light briefly turns on before turning off. The new key is now programmed. The Remote Keyless Entry transmitter will also be programmed during this procedure. Repeat this procedure to program up to eight keys.

If you only have ONE WORKING REMOTE/KEY and want to add a second key: Buy a programmer.

If you have no working keys: Locate a locksmith in your area.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2007 Dodge Ram Pickup