Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2006 Chrysler Sebring

Step-by-Step Programming Instructions:

Note: To add a new key to the system, ensure you have two valid keys. Without them, a locksmith will need to program a key for you. Here’s the procedure:

1. Insert the first valid key into the ignition switch. Turn the ignition switch to the ON/RUN position for at least three seconds, but no longer than 15 seconds. Then, turn the ignition switch to the LOCK position and remove the first key.

2. Insert the second valid key into the ignition switch. Turn the ignition switch to the ON/RUN position within 15 seconds. After 10 seconds, a chime will sound, and the Vehicle Security Light will start flashing. Turn the ignition switch to the LOCK position and remove the second key.

3. Insert the new key into the ignition switch. Turn the ignition switch to the ON/RUN position within 60 seconds. After 10 seconds, a single chime will sound, and the Vehicle Security Light will stop flashing. To confirm programming completion, the Vehicle Security Light will briefly turn on before turning off. Your new key is now programmed. Repeat this procedure to program up to eight keys.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2006 Chrysler Sebring