Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2019 Chevrolet Malibu

Step-by-Step Programming Instructions:

Programming with Recognized Transmitters:
When two recognized transmitters are available, a new transmitter can be programmed to the vehicle. To initiate programming, ensure the vehicle is turned off, and all transmitters, both currently recognized and new, must be with you.

1. Place the two recognized keys in the front cup holder.
2. Remove the key lock cylinder cap on the driver door handle. Insert the vehicle key of the new transmitter into the key lock cylinder on the outside of the driver door and turn the key to the unlock position five times within 10 seconds. The Driver Information Center (DIC) will display READY FOR REMOTE #2, 3, 4, or 5, etc.
3. Insert the new transmitter into the transmitter pocket with the buttons facing toward the rear of the vehicle, located inside the center console storage area.
4. Press ENGINE START/STOP. Once the transmitter is learned, the DIC will indicate readiness to program the next transmitter.
5. Remove the transmitter from the front cup holder and press UNLOCK or LOCK on the transmitter. To program additional transmitters, repeat Steps 3–5. After programming all additional transmitters, press and hold ENGINE START/STOP for 12 seconds to exit programming mode.
6. Return the vehicle key to the transmitter.

Programming without Recognized Transmitters:
If two currently recognized transmitters are not available, follow this procedure to program up to eight transmitters. Note that this feature is not available in Canada, and the procedure takes approximately 30 minutes to complete. Ensure the vehicle is off, and all of the transmitters you wish to program must be with you.

1. Remove the key lock cylinder cap on the driver door handle. Insert the vehicle key of the transmitter into the key lock cylinder on the outside of the driver door and turn the key to the unlock position five times within 10 seconds. The Driver Information Center (DIC) will display REMOTE LEARN PENDING, PLEASE WAIT.
2. Wait for 10 minutes until the DIC displays PRESS ENGINE START BUTTON TO LEARN, then press ENGINE START/STOP. The DIC will again display REMOTE LEARN PENDING, PLEASE WAIT.
3. Repeat Step 2 two additional times. After the third time, all previously known transmitters will no longer work with the vehicle. Remaining transmitters can be relearned during the next steps. The DIC should now show READY FOR REMOTE # 1.
4. Insert the new transmitter into the transmitter pocket with the buttons facing toward the rear of the vehicle, located inside the center console storage area.
5. Press ENGINE START/STOP. When the transmitter is learned, the DIC will indicate readiness to program the next transmitter.
6. Remove the transmitter from the front cup holder and press UNLOCK or LOCK on the transmitter. To program additional transmitters, repeat Steps 4–6. After programming all additional transmitters, press and hold ENGINE START/STOP for 12 seconds to exit programming mode.
7. Return the vehicle key to the transmitter.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2019 Chevrolet Malibu