Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2010 Chevrolet Corvette

Step-by-Step Programming Instructions:

Programming with a Recognized Transmitter (Canadian Vehicles):

For Canadian vehicles, two recognized transmitters are required to add a new key fob. Here’s the procedure:

1. Ensure the vehicle is off.
2. Have both the programmed and the new key fob with you.
3. Insert the vehicle key into the key cylinder located on the lower rear fascia on the driver’s side of the vehicle.
4. Open the trunk.
5. Turn the key five times within five seconds.
6. The DIC will display: READY FOR FOB X (X = fob 2, 3, or 4).
7. Place the new key fob in the glove box key fob pocket with the buttons facing right.
8. A beep will occur, and the DIC will display: READY FOR FOB X (X = fob 3 or 4) or MAX FOBS LEARNED.
9. If programming additional key fobs, repeat step 7, or press the OFF/ACC portion of the ignition switch to exit programming mode.
10. Press Unlock on each newly programmed key fob to complete the procedure.

Programming without a Recognized Transmitter (Canadian Vehicles):

If there are no recognized transmitters available, consult a locksmith or dealer for assistance. Here’s the procedure:

1. Ensure the vehicle is off.
2. Place the new key fob in the glove box key fob pocket with the buttons facing right.
3. Insert the vehicle key into the key cylinder located on the lower rear fascia on the driver’s side of the vehicle.
4. Open the trunk.
5. Turn the key five times within five seconds.
6. The DIC message will display OFF-ACC TO LEARN.
7. Press ACC on the ignition switch.
8. The DIC will read WAIT 10 MINUTES and count down to zero.
9. The DIC message will display OFF-ACC TO LEARN again.
10. Press ACC on the ignition switch.
11. Repeat steps 8, 9, and 10 two more times.
12. A beep sounds, and the DIC will read READY FOR FOB #1. All previously programmed key fobs have been erased at this time.
13. A beep sounds once programming is complete. The DIC displays READY FOR FOB #2. To program additional key fobs, take key fob 1 out of the transmitter pocket and place key fob 2 in the transmitter pocket. Up to 4 key fobs can be programmed. The DIC then displays MAXIMUM NUMBER OF FOBS LEARNED and exits the programming mode automatically. Press ACC on the ignition switch to complete the process.
14. Press ACC on the ignition switch if programming is complete.
15. Press Unlock on each newly programmed key fob to complete the procedure.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2010 Chevrolet Corvette