How to Program a 2024 Lincoln Nautilus Ignition Smart Chip Key Transponder

Step by Step How to Programming Instructions:

Please note that you can program a maximum of four Intelligent Access Keys. If you don’t have two previously programmed keys available, you’ll need to contact a locksmith for assistance. Ensure the ignition is switched off and all doors are closed before starting. Complete each step within 30 seconds and wait at least one minute if you need to restart. Read and understand the entire procedure before beginning:

1. Open the floor console storage compartment lid.
2. Insert the Intelligent Access Key into the backup slot with the buttons facing the rear of the vehicle and the keyring up.
3. Press the push-button ignition switch.
4. Wait five seconds, then press the push-button ignition switch again.
5. Remove the Intelligent Access Key.
6. Within 10 seconds, insert a second programmed Intelligent Access Key into the backup slot and press the push-button ignition switch.
7. Wait five seconds, then press the push-button ignition switch again.
8. Remove the Intelligent Access Key.
9. Wait five seconds, then insert the unprogrammed Intelligent Access Key into the backup slot and press the push-button ignition switch. If programming was unsuccessful, wait 10 seconds and repeat Steps 1 through 7.