How to Program a 2024 Chevrolet Blazer Ignition Smart Chip Key Transponder

Step by Step How to Programming Instructions:

Each vehicle can be matched with up to eight remote keys. To program a new key when two recognized keys are available:

1. Place the two recognized remote keys on the passenger seat.
2. Navigate to the DIC menu and select “Remote Key Relearn”. The DIC will display “READY FOR REMOTE #3, 4, 5,” etc.
3. Put the new remote key into the front cupholder.
4. Press ENGINE START/STOP. Once the remote key is learned, the DIC will indicate readiness to program the next remote key.
5. Remove the remote key from the front cupholder and press UNLOCK or LOCK on the remote key. To program additional remote keys, repeat steps 4–5. When all additional remote keys are programmed, press and hold ENGINE START/STOP for approximately 12 seconds to exit programming mode.

If two recognized remote keys are not available:

1. Find an automotive locksmith in your area using LocateALocksmith.com.
2. If your vehicle is still mobile, consider driving to the locksmith to potentially save money.
3. The locksmith will use specialized computer equipment to program the smart key remote fob to your vehicle.