How to Program a 2023 Lincoln Corsair Ignition Smart Chip Key Transponder

Step by Step How to Programming Instructions:

You’ll need two previously programmed remote controls inside your vehicle and the new unprogrammed remote control accessible. Ensure your vehicle is off before starting, close all doors, and keep them closed throughout. Perform all steps within 30 seconds of starting the sequence, and wait at least one minute if any steps are performed out of order. Read and understand the entire procedure before beginning.

1. Place the first programmed remote in the backup slot inside the center console. With your foot off the brake pedal, press and release the push-button ignition switch. Wait five seconds, then press and release the ignition switch again. Remove the remote.

2. Within 10 seconds, place the second programmed remote control in the backup slot. Press and release the ignition switch, wait five seconds, then press and release it again. Keep the ignition on for at least three seconds but no more than 10, then remove the remote.

3. Place the unprogrammed remote control in the backup slot and press and release the ignition switch. Programming is now complete.

4. With your foot on the brake pedal, press the ignition switch to verify the remote control functions and that your vehicle starts with the new remote control.

5. If programming was unsuccessful, wait 10 seconds and repeat Steps 1 through 3. If you have no working key fobs or only one, you’ll need to have a locksmith program additional key fobs for you.

Additional Tips:
1. Locate an automotive locksmith in your area using LocateALocksmith.com.
2. If your vehicle is still mobile, consider driving to the locksmith to potentially save money.
3. The locksmith will hook up specialized computer equipment to your vehicle to program the smart key remote fob.