How to Program a 2019 Ford Transit Ignition Chip Key Transponder

Step by Step How to Programming Instructions:

1. Begin with two programmed keys and one unprogrammed key ready.
2. Insert the first programmed key into the ignition.
3. Turn the ignition from off to on, holding it for at least three seconds but no more than ten.
4. Turn the ignition off and remove the first programmed key.
5. Within ten seconds, insert the second programmed key into the ignition.
6. Turn the ignition from off to on, again holding it for at least three seconds but no more than ten.
7. Turn the ignition off and remove the second programmed key.
8. Within ten seconds, insert the new unprogrammed key into the ignition.
9. Turn the ignition from off to on, holding it for at least six seconds.
10. Remove the newly programmed key from the ignition.
11. If successful, the engine will start, and the remote entry system (if integrated) will operate. If unsuccessful, wait ten seconds and repeat steps 1 through 8.