How to Program a 2019 Ford Focus Ignition Smart Chip Key Transponder

Step by Step How to Programming Instructions:

Use these steps if your Ford Flex is equipped with the remote/key combo system. You’ll need two previously programmed keys and the new unprogrammed key accessible. If you lack two previously programmed keys, a locksmith is required to cut and program a second key.

1. Insert the first previously programmed key into the ignition.
2. Switch the ignition from off to on. Keep it on for at least three seconds but no more than ten seconds.
3. Turn the ignition off and remove the first programmed key.
4. After three seconds but within ten seconds of switching off the ignition, insert the second previously programmed key.
5. Turn the ignition from off to on. Keep it on for at least three seconds but no more than ten seconds.
6. Turn the ignition off and remove the second previously programmed key.
7. After three seconds but within ten seconds of turning off the ignition and removing the previously programmed key, insert the new unprogrammed key.
8. Turn the ignition from off to on. Keep it on for at least six seconds.
9. Remove the newly programmed key from the ignition. If successfully programmed, it will start the engine and operate the remote entry system (if the new key is an integrated key head transmitter). If unsuccessful, wait ten seconds and repeat Steps 1 through 8.

For Ford Flex vehicles with the smart key system, they are not onboard programmable and require a qualified professional to program smart key remote fobs.

1. Locate an automotive locksmith in your area using LocateALocksmith.com.
2. If your vehicle is still mobile, it may save you money by driving to the locksmith instead of having them come to you.
3. The locksmith will then hook up specialized computer equipment to your vehicle to program the smart key remote fob.