How to Program a 2019 Cadillac Escalade Ignition Smart Chip Key Transponder

Step by Step How to Programming Instructions:

Programming a new key to the vehicle can be done when there are two recognized keys. Follow these steps:

For Yukon with front bench seat:
1. Place the two recognized remote keys on the passenger seat.
2. Scroll to the DIC menu and select “Remote Key Learn.” The DIC will display “READY FOR REMOTE #3, 4, 5, ETC.”
3. Insert the new remote key into the backup pocket in the lower console bin.
4. Press ENGINE START/STOP. Once the remote key is learned, the DIC will indicate readiness to program the next remote key.
5. Remove the remote key from the backup location and press UNLOCK or LOCK on the remote key. To program additional remote keys, repeat Steps 3–5. When all additional remote keys are programmed, press and hold ENGINE START/STOP for approximately 12 seconds to exit programming mode.

For Yukon without front bench seat:
1. Place the two recognized remote keys on the passenger seat.
2. Scroll to the DIC menu and select “Remote Key Learn.” The DIC will display “READY FOR REMOTE #3, 4, 5, ETC.”
3. Place the new remote key into the backup pocket in the left cup holder.
4. Press ENGINE START/STOP. Once the remote key is learned, the DIC will indicate readiness to program the next remote key.
5. Remove the remote key from the backup location and press UNLOCK or LOCK on the remote key. To program additional remote keys, repeat Steps 3–5. When all additional remote keys are programmed, press and hold ENGINE START/STOP for approximately 12 seconds to exit programming mode.

Programming without Recognized Remote Keys:
If two currently recognized remote keys are not available:

1. Locate an automotive locksmith in your area using LocateALocksmith.com.
2. If your vehicle is still mobile, it may save you money by driving to the locksmith instead of having them come to you.
3. The locksmith will then hook up specialized computer equipment to your vehicle in order to program the smart key remote fob.