How to Program a 2018 Chevrolet Corvette Ignition Smart Chip Key Transponder

Step by Step How to Programming Instructions:

To program a spare intelligent access key, you must have two previously programmed keys and the new unprogrammed key readily accessible. If you do not have two previously programmed keys, you will need a locksmith to cut and program a second key.

1. Remove the rubber covering in the cup holder and place the first programmed key in the backup slot at the bottom of the cup holder.
2. Wait for 5 seconds, and then press the START/STOP button.
3. Remove the intelligent access key.
4. Within 10 seconds, place a second programmed intelligent access key in the backup slot and press the START/STOP button.
5. Wait for 5 seconds, and then press the START/STOP button again.
6. Remove the intelligent access key.
7. Wait for 5 seconds, then place the unprogrammed intelligent access key in the backup slot and press the START/STOP button.
8. Programming is now complete. Verify that the remote control functions operate and your vehicle starts with the new intelligent access key. If programming was not successful, wait for 10 seconds and repeat Steps 1 through 7.