404 Not Found


nginx
404 Not Found

404 Not Found


nginx
How to Program a 2018 Buick Enclave Ignition Smart Chip Key Transponder - KeyLessCanada : Instructions

Powered By
KeylessCanada.com

PROGRAMMING INSTRUCTIONS:

How to Program a 2018 Buick Enclave Ignition Smart Chip Key Transponder

0
23

How to Program a 2018 Buick Enclave Ignition Smart Chip Key Transponder

Step by Step How to Programming Instructions:

1. Insert the original, already programmed key into the ignition and turn it to the ON/RUN position.
2. Turn the key to LOCK/OFF and remove it.
3. Insert the new key to be programmed and turn it to the ON/RUN position within five seconds. The security light will turn off once the key has been programmed.
4. Repeat Steps 1–3 if additional keys are to be programmed. If a key is lost or damaged, see your dealer to have a new key made.

Programming without a Programmed Remote/Key:
U.S. owners can program a new key to their vehicle when a programmed key is not available. Canadian regulations require Canadian owners to see their dealer for programming new keys when a programmed key is not available. If there are no currently programmed keys available, follow this procedure to program the first key. This procedure will take approximately 30 minutes to complete for the first key. The vehicle must be off, and all the keys you wish to program must be with you.

1. Insert the new vehicle key into the ignition.
2. Turn to ON/RUN. The security light will come on.
3. Wait 10 minutes until the security light turns off.
4. Turn the ignition to LOCK/OFF.
5. Repeat Steps 2–4 two more times. After the third time, turn to ON/RUN; the key is learned, and all previously known keys will no longer work with the vehicle. Remaining keys can be learned by following the procedure in “Programming with a Programmed Remote/Key.”

Leave a reply

X
X