How to Program a 2016 Ford Escape Ignition Smart Chip Key Transponder

Step by Step How to Programming Instructions:

For Ford Escape with remote/key combo and two previously programmed keys available:

1. Insert the first previously programmed key into the ignition.
2. Switch the ignition from off to on. Keep it on for at least three seconds but no more than ten seconds.
3. Switch the ignition off and remove the first programmed key.
4. After three seconds but within ten seconds of switching off the ignition, insert the second previously programmed key.
5. Switch the ignition from off to on. Keep it on for at least three seconds but no more than ten seconds.
6. Switch the ignition off and remove the second previously programmed key.
7. After three seconds but within ten seconds of switching off the ignition and removing the previously programmed key, insert the new unprogrammed key.
8. Switch the ignition from off to on. Keep it on for at least six seconds.
9. Remove the newly programmed key from the ignition. If the key has been successfully programmed, it will start the engine and operate the remote entry system. If not, wait ten seconds and repeat Steps 1 through 8.

If you only have one working remote/key and want to add a second key, you’ll need to buy or rent a programmer. For Ford Escapes with the smart key system:

1. Locate an automotive locksmith in your area using LocateALocksmith.com.
2. If your vehicle is still mobile, it may save you money to drive to the locksmith instead of having them come to you.
3. The locksmith will then hook up specialized computer equipment to your vehicle in order to program the smart key remote fob.