How to Program a 2016 Chevrolet Impala Ignition Smart Chip Key Transponder

Step by Step How to Programming Instructions:

To program spare remote head keys, you’ll need two previously programmed keys and the new unprogrammed key accessible. If you lack two previously programmed keys, a locksmith’s assistance is necessary to cut and program a second key. If you have one working key, you can purchase or rent a programmer and key from Keyless Canada.

1. Insert the first previously programmed key into the ignition.
2. Turn the ignition from off to on and keep it on for at least three seconds, but no more than ten seconds.
3. Turn the ignition off and remove the first programmed key.
4. Within ten seconds of switching off the ignition, insert the second previously programmed key into the ignition.
5. Turn the ignition from off to on and keep it on for at least three seconds, but no more than ten seconds.
6. Turn the ignition off and remove the second previously programmed key.
7. Within ten seconds of switching off the ignition and removing the previously programmed key, insert the new unprogrammed key into the ignition.
8. Turn the ignition from off to on and keep it on for at least six seconds.
9. Remove the newly programmed key from the ignition.

If the key has been successfully programmed, it will start the engine and operate the remote entry system (if the new key is an integrated key head transmitter). If programming was unsuccessful, wait ten seconds and repeat steps 1 through 8.”