How to Program a 2015 Ford Flex Ignition Smart Chip Key Transponder

Step by Step How to Programming Instructions:

1. Begin with two previously programmed keys and the new unprogrammed key readily accessible. If you lack two previously programmed keys, consult a locksmith to cut and program a second key. Read and understand the entire procedure before starting.
2. Insert the first previously programmed key into the ignition.
3. Switch the ignition from off to on. Keep the ignition on for at least three seconds but no more than ten seconds.
4. Switch the ignition off and remove the first programmed key from the ignition.
5. After three seconds but within ten seconds of switching the ignition off, insert the second previously programmed key into the ignition.
6. Switch the ignition from off to on. Keep the ignition on for at least three seconds but no more than ten seconds.
7. Switch the ignition off and remove the second previously programmed key from the ignition.
8. After three seconds but within ten seconds of switching the ignition off and removing the previously programmed key, insert the new unprogrammed key into the ignition.
9. Switch the ignition from off to on. Keep the ignition on for at least six seconds.
10. Remove the newly programmed key from the ignition. If the key has been successfully programmed, it will start the engine and operate the remote entry system. If programming was not successful, wait ten seconds and repeat steps 1 through 8.

Instructions for Ford Fiesta with Smart Key System:

1. This vehicle is not onboard programmable and requires a qualified professional to program smart key remote fobs.
2. Locate an automotive locksmith in your area using LocateALocksmith.com.
3. If your vehicle is still mobile, it may save you money by driving to the locksmith instead of having them come to you.
4. The locksmith will then hook up specialized computer equipment to your vehicle in order to program the smart key remote fob.