How to Program a 2015 Ford Expedition Ignition Smart Chip Key Transponder

Step by Step How to Programming Instructions:

1. Remove the key blade from the transmitter.
2. Open the floor console storage compartment lid.
3. Insert the first programmed key into the backup slot.
4. Press the push-button ignition switch.
5. Wait for five seconds and then press the push-button ignition switch again.
6. Remove the intelligent access key.
7. Within 10 seconds, place a second programmed intelligent access key in the backup slot and press the push-button ignition switch.
8. Wait five seconds and then press the push-button ignition switch again.
9. Remove the intelligent access key.
10. Wait five seconds, then place the unprogrammed intelligent access key in the backup slot and press the push-button ignition switch.

Programming is now complete. Verify that the remote control functions operate and your vehicle starts with the new intelligent access key. If programming was unsuccessful, wait 10 seconds and repeat steps 1 through 7.

Remember to ensure that the ignition is switched off before starting the procedure and that all doors are closed throughout the process. Also, carry out all steps within 30 seconds of starting the sequence and wait for at least one minute before starting again if any steps are carried out of sequence. Make sure to read and understand the entire procedure before beginning.