How to Program a 2014 Chevrolet Volt Ignition Chip Key Transponder

Step by Step How to Programming Instructions:

1. Open the center console lid.
2. With the buttons facing up and the unlock button towards the front of your vehicle, insert the first programmed key into the backup slot inside the center console.
3. Press the ignition button. Wait for 5 seconds and then press the ignition button again.
4. Remove the key.
5. Within 10 seconds, insert a second programmed key into the backup slot and press the ignition button.
6. Wait for 5 seconds and then press the ignition button again.
7. Remove the key.
8. Wait for 5 seconds, then insert the unprogrammed key into the backup slot and press the ignition button.
9. Once complete, the information cluster will display a message confirming that you have programmed the key. If programming was unsuccessful, wait for 10 seconds and repeat the procedure.